Add 90° right turns or 30° diversions with the new MDR High Speed Electric Transfer and Diverter modules from Hilmot | 2016-02-16 | DC Velocity

2022-06-25 06:34:12 By : Mr. Allen Jiang

Add 90° right turns or 30° diversions with the new MDR High Speed Electric Transfer and Diverter modules from Hilmot

Transfer and diversion modules add flexibility to motorized drive roller conveyor systems by accommodating changing material handling applications

MILWAUKEE, Wis., (February 16, 2016) - The new MDR High Speed Electric Transfer (HCAT90) and Diverter (HCAT30) modules from Hilmot (www.hilmot.com) gives users added flexibility in configuring their packaging or tote-handling applications by allowing 90° right turns and 30° diversions to their motorized drive roller conveyor systems.

The HCAT90 Transfer is ideal for any application where a 90° right turn is needed, such as sortation, distribution or assembly. The HCAT30 Diverter provides a 30° angle to move packages and totes to a separate line. Both modules use three MDR conveyors to provide the rollers, belts and lifting motion.

A key feature in both the HCAT90 Transfer and HCAT30 Diverter modules is that they're fully powered by 24 volt DC electricity for lower cost and quiet, efficient operation. This design element removes the need to run tubing and pneumatics from a compressor unit, through the conveyor system to the modules. No electric actuator or pneumatic cylinder is needed.

Additionally, both modules are engineered to handle higher rates (40 products per minute for the HCAT90; 50 products per minute for the HCAT30). The HCAT90 features a low profile frame for easy stacking of multi level conveyor lines, while the HCAT30 can be located virtually anywhere along the conveyor line, with multiple diverter modules being placed as few as 60 inches apart. Both modules can be added into existing MDR conveyor systems with minor modifications.

Features and benefits of the HCAT 90 Transfer include: • Standard widths from 15" to 36" between frame (18" to 39" over all width); other sizes can be custom built to accommodate different dimensions • 24", 30" or 36" zone lengths • Belt speeds about 150 feet per minute • Accommodate packages as small as 8" x 8" • Built-in sensor bar, one per zone at zone in-feed • Pre-wired for factory testing and quick installation • 24 volt DC brushless, 1.9" diameter motorized rollers • Shroud or fascia • Networked with bus technology available • Precision bearings in idler rollers

Features and benefits of the HCAT 30 Diverter include: • Standard widths from 15" to 36" between frame; other sizes can be custom built to accommodate different dimensions • 30" or 36" zone lengths • Belt speeds about 150 feet per minute • Accommodate packages as small as 8" x 8" • Pre-wired for factory testing and quick installation • 24 volt DC brushless, 1.9" diameter motorized rollers • Networked with bus technology available • Precision bearings in idler rollers

For more information on the new HCAT90 Transfer and HCAT30 Diverter modules, visit www.hilmot.com, or call 800-799-4492.

Hilmot is a leading manufacturer of motorized drive roller (MDR) and conventional King Series conveyor systems for numerous material handling industries such as manufacturing, distribution, assembly, order picking and more. Its commitment: take care of the customer and we secure the future, is a philosophy held by every Hilmot employee. Hilmot's goal is to earn their customers' complete satisfaction through the proper design, application, installation and service of 24 volt conveyor equipment and systems.

Company URL: http://www.hilmot.com/#!featured-products/c1ftd

Copyright ©2022. All Rights ReservedDesign, CMS, Hosting & Web Development :: ePublishing