The Answer is Yes - and it’s an Alternative that Provides Carton Control with Less Energy Usage

Cliff Holste Materials Handling Editor

MDR technology has the potential to save cost on the shipping dock by replacing decline belt and zero-pressure accumulation conveyors with Motorized Control Flow Gravity while at the same time reducing energy consumption.

Click Here to See Reader Feedback

Much of the buzz at the recent ProMat 2009 trade show centered on the application of Motor Driven Roller (MDR) technology as an alternative to the more conventional belt-driven systems. (See ProMat 2009 Review and Comment.)  However, lost in the glitz of the showy, chrome-plated rollers is a relatively simple MDR application that can control the flow of packages on gravity conveyor lines, while reducing energy consumption.

Harnessing the power of Gravity

It is doubtful that esteemed Sir Isaac Newton spent time thinking about conveying applications for gravity, but if he had, he would have discovered that there are a few problems with it. For example:

These are just some of the more prominent challenges – there are others.

To combat these problems, material handling product engineers have developed lots of ingenious ways to take advantage of the free and naturally occurring force of gravity, while attempting to control the flow of cases on a pitched roller conveyor line. 

These include applying friction brakes equipped with elastomeric urethane wheels that deflect and absorb kinetic energy through hysteresis, as well as more elaborate designs involving brake pad assemblies, cams, springs, elongated cable systems, fluid pressure, pneumatic pressure, and a host of other equipment and apparatus, all of which are designed to provide some degree of flow control. 

Most of these designs are capable of controlling flow for specific applications having a limited range of case sizes and weights. But they are not that effective in distribution centers where extreme case size and weight ranges are typical.

(Distribution Article - Continued Below)

Expert Services for JDA WMS

The Keys to WMS Success,

A few conveyor manufacturers have recently developed what could be considered a “hybrid” solution, meaning that it uses a small amount of electricity.  Referred to as Motorized Control Gravity (MCG), it’s intended for use in shipping line conveyors to transport cases from the shipping sorter to the dock for palletizing or fluid trailer loading applications.

In a pitched gravity roller shipping line that is 60 to 80 feet long (for example), there would be 3 to 4 MCG Modules, as illustrated above.  Each module would have a powered roller bed zone that is 3 to 4 ft long.  A 24-volt motor and gear box assembly is inserted inside the drive roller (like a ship in a bottle). As a case enters a zone and trips the photo-eye (PE) on the in-feed end of the zone, the 24-volt motorized drive roller is de-energized for a specified time delay (about 2 or 3 seconds), which causes a temporary braking action of the carrying rollers.  After the time delay expires, and the PE on the discharge end of the zone is clear, the drive roller is re-energized and the case is released to the next MCG located about 20 feet downstream. 

However, if the PE on the discharge end of the zone is blocked when a case trips the in-feed PE, the drive roller remains de-energized, stopping case flow thru the zone. When the discharge PE is clear, flow resumes.

The accumulated backpressure is limited to the distance between the gravity control flow modules – about 20 feet. In this way, all of the various size and weight cases will flow smoothly from MCG to MCG down the shipping line.

In many system applications, MDR technology has the potential to save costs on the shipping dock by replacing decline belt and zero-pressure accumulation conveyors with Motorized Control Flow Gravity, while at the same time reducing energy consumption.

So, with a little creative thought and innovation, adding Motorized Control Flow Gravity to your material handling system becomes a low-cost, Green alternative worth considering.

Do you think this hybrid gravity conveyor is a good one for DC applications? Where are the best fits? Let us know your thoughts at the Feedback button below.